How do I remove the Turbo-arm from my 300L mixer?

How to remove the Turbo-arm from your 300L SoRoTo Forced Action Mixer

You need:

• Spanner 22
• Spanner 8

BEWARE: Do not plug in the machine, unless else is clearly stated.

1:5 Remove the safety disc

Remove the 3 small bolts form the yellow safety disc - with spanner 8.
Remove the safety disc.

2:5 Remove the turbo-arm

Remove the 2 u-bolts - with spanner 22.
Put away the turbo-arm.

3:5 Move the mid-base arm

The mid-base blade is located in between tower and drum edge.
Remove the 2 u-bolts - with spanner 22.
Mount the mid-base arm where the turbo-arm was.
Mount the u-bolts losely.
Adjust the separation bolt until the blade is 1-3 mm from the base.
Fasten the u-bolts and tighten the separation bolt.

4:5 Mount the tower-base arm

Mount the tower-base arm in the mid-base arm’s old spot.
Mount the u-bolts losely.
Adjust the separation bolt until the blade is 1-3 mm from the base and tower.
Fasten the u-bolts and the separation bolt.

5:5 Mount the safety disc

Put the safety disc on again and fasten the bolts - with spanner 8.